Guide To Flash LG G FLEX 2 H955 / H959 / H955TR

Please follow this guide carefully to flash LG G FLEX 2 H955 / H959 / H955TR .

Make sure you have download all requirement tool above

Then Install the drivers with your phone connected with your Computer, when it finished disconnect your LG G FLEX 2 H955 / H959 / H955TR phone from your computer.

Now turn your LG G FLEX 2 H955 / H959 / H955TR phone off, then click continuously on the up volume and connect your phone to your PC,

Now, enter your LG G FLEX 2 H955 / H959 / H955TR into download mode.  ( visit this guide or see at the end of this post)

Run LGFlashTool2014.exe.

If you cannot run LGFlashTool2014.exe, You must install Visual C++ Runtime Library, get here
There are two options to flash your LG G FLEX 2 H955 / H959 / H955TR.

Normal Flash : You can select this option if you want Flash ROM without losing any data. Only use this when you need to fix system error.

CSE Flash : You can choose this option when you need a fresh format. All data will be deleted. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.

LG flash tool normal flash / CSE flash
LG flash tool normal flash / CSE flash
Select Type: CDMA
PhoneMode: DIAG
Select KDZ file : browse your KDZ file in your drive
Then you can Click on Normal Flash or CSE Flash (see step 7 to decide this option)
Then click Start.
LG flash tool - start
LG flash tool - start
Then click on Clear Phone Software update registry.
Lg flash tool - Clear Phone Software update registry.
Lg flash tool - Clear Phone Software update registry.
No need to choose desired language, it automatically change to English as a default setting.
Finally you can click OK.

You must wait a minute for the LG Mobile Support tool to recognize the LG G FLEX 2 H955 / H959 / H955TR device.

When you wait this process, may take 5 minute the tool to recognize it.
The software will start the extraction on your device.

When the process reach 100% your LG G FLEX 2 H955 / H959 / H955TR will reboot.
Then, you must Unplug your LG G FLEX 2 H955 / H959 / H955TR from your computer by remove USB Cable from it.
Finish,

Enter LG G FLEX 2 H955 / H959 / H955TR To Download Mode.

To enter LG AKA in download mode, you can follow this guide :
Remove batterei from your phone
Plug USB cable to your PC
Press and Hold volume UP Button, while cable plugs USB Cable from PC to your Phone

Then will appear white note on your LG G FLEX 2 H955 / H959 / H955TR phone, if you see this you can releasa Volume UP button.

Press and hold volume UP Button on your LG G FLEX 2 H955 / H959 / H955TR phone again, until you see FIRMWARE UPDATE message.

If your phone has been detected in your PC (to make sure, click the monitor icon beside Read Phone Information button, this action will open device manager windows. If your phone was detected you can see this at the top)

Click START, and you will see dialogue box, just click OK
Wait for the flash process, it will run in approximately 5 minute and your LG G FLEX 2 H955 / H959 / H955TR will restart itself

Then your LG G FLEX 2 H955 / H959 / H955TR phone will boot up, if you can see Welcome Screen, it's mean Flashing process is successfully.
Unplug USB cable, and finish

Now your LG G FLEX 2 H955 / H959 / H955TR is installed new firmware.

Download Driver LG Download

Latest LG FlashTool Download

Download Stock Rom LG G FLEX 2 H955 / H959 / H955TR  Download

citation  Click to

Yorum Gönderme

 
Top